Blog

Why Is My Furnace Blowing Cold Air?

After spending a long day out in the cold, there’s no better feeling than returning to a toasty warm home. But what happens when you come home to your furnace not heating, or even worse, your furnace blowing cold air? Follow these steps to learn how to troubleshoot your furnace blowing cold air and learn when to call for a repair.

1. Review your thermostat’s settings

If your thermostat fan setting is set to the “ON” position, this means that the fan will run continuously whether the unit is heating or not.  Therefore it isn’t uncommon to experience cool air coming from your registers between heating cycles. There are many benefits to running a continuous fan, such as energy efficiency, regulated home temperatures, cleaner air, etc. With the “AUTO” setting chosen, your furnace should only run the fan during a heating cycle. If you’ve had your thermostat for a while, be sure to check the battery level as it may be low and therefore needs to be replaced.

2. Check to see if your furnace has warmed up

Oftentimes a furnace will need a few minutes to warm up when it’s first turned on. Because of this, it’s perfectly normal for cool air to blow from the vents while your furnace warms up. If warm air doesn’t begin to fill your space after a few minutes, continue to follow the steps below.

3. Check the furnace air filter

A dirty air filter will prevent the movement of air through the furnace and raise its interior temperature, causing it to overheat. When your furnace becomes overheated, it signals the safety control to turn off the burners. However, your fan will continue to run, resulting in cold air being blown into your home. To prevent this from happening, we suggest replacing your air filter. Upon doing this, the furnace should cool down and restart, bringing normal airflow back into the system and warm air back into your home. 

4. Check the pilot light

If your furnace’s pilot light goes out, the furnace will blow cold air due to fuel combustion not taking place. If you are comfortable doing so you can relight your pilot light, or call a local utility company or HVAC technician to ensure that it is properly lit. If your pilot light continues to go out or doesn’t light at all, you may need routine maintenance from a heating and cooling professional.

5. Check your furnace’s control panel

When a furnace blows cold air, there may be an issue with the unit’s electronic control panel. If there’s an LED light visible from the front panel of your heating unit, it’s a good idea to record the sequence and number of flashes before resetting the power.  Video of the LED light flash sequence can help a technician diagnose the issue if the reset doesn’t resolve the issue. Another option is to make notes on paper regarding the flash sequence.  Sometimes, the problem can be solved by doing a system reset. First, turn off the power to the furnace at its ON/OFF switch, then wait a few minutes and flip the switch back to ON.  When restarting the unit, pay attention and document any odd sounds or smells coming from the unit as it attempts to reignite.  If this doesn’t correct the problem, we recommend calling one of our furnace repair technicians. 

6. Check for leaking ducts

Sometimes, a furnace blows cold air due to damaged or leaking ducts. Leaks in ductwork allow heat energy to escape, so once heated air reaches your living areas, it no longer feels warm. To fix this, you will need to have your duct leaks pinpointed and repaired by a professional.

If you have completed this checklist and are still having problems with cold air blowing from your furnace, we suggest having your furnace looked at by a Diamond Heating & AirTemp Alaska HVAC  technician, as there may be something more serious happening within your system. Schedule an appointment today and receive $25 off your repair!

Like this article?

Enter your email and get them sent to your inbox automatically.

Latest Articles

6 Areas Of Your Home Where You Lose The Most Heat

When heat loss occurs in your home it not only raises your energy bills but can also put a heavy strain on your furnace or boiler system. This strain on your system can ultimately cause a breakdown and may result in replacing your heating system sooner than expected. In order to...
Read Full Article »

5 Signs Your Heating Unit Is About To Give Out

Signs Your Heating Unit Is About To Give Out
Do you find yourself trying to stay warm while your heating unit struggles to keep up? We all know Alaskan winters can be harsh, and a reliable heating system is essential to survive the freezing temperatures. However, even the toughest HVAC units have a lifespan, and over time, they can show...
Read Full Article »

Tropical Cheers: A Celebration with Purpose

At Diamond Heating & AirTemp Alaska, we’re dedicated to our customers and community, and our holiday celebration this year truly reflected that commitment. Our holiday party was a memorable blend of entertainment and philanthropy, taking a unique twist on the traditional holiday theme. When you think of holiday parties, you may...
Read Full Article »

Q&A With Comfort Consultant Sam

Meet Sam, Diamond Heating & AirTemp Alaska’s go-to Comfort Consultant who has been breaking records and exceeding client expectations since day one.  With a background in HVAC and a natural knack for connecting with people, Sam has found a way to blend technical expertise with genuine customer care. Whether you’re curious...
Read Full Article »